Canyon 4WD V8-5.3L (2009)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove both wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper Arm/Service and Repair).
3. Remove the fixed antenna mast. Refer to Fixed Antenna Mast Replacement (See: Accessories and Optional Equipment/Antenna/Antenna
Mast/Service and Repair).
4. Remove the retainers (1, 3, 5) securing the air inlet panel grille (2) to the cowl panel.
5. Remove the air inlet panel from around the hood hinges.
6. Roll the air inlet panel (4) forward.
7. Disconnect the hose from the washer nozzles (2, 3).
