Canyon 4WD V8-5.3L (2009)
5. For the driver side blade (2), ensure the wiper blade tip is held in position to the alignment dot (1) on the windshield.
6. Holding the wiper blade to the windshield dot, install the wiper arm nut.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Continue holding the wiper blade in position while tightening the nut.
Tighten the wiper arm nut to 33-38 Nm (24-28 lb ft).
8. Install new wiper arm nut covers.
9. Close the hood.
