Envoy 2WD L6-4.2L (2008)
Rear Door Weatherstrip: Service and Repair
Rear Door Upper Sealing Strip Replacement
Rear Door Upper Sealing Strip Replacement
Removal Procedure
1. Starting at the bottom of the sealing strip, pull the sealing strip away from the door pinch-weld flange.
2. Lift upward in order to remove the upper portion of the sealing strip from the door pinch-weld flange.
3. Remove the sealing strip from the door.
Installation Procedure
1. Starting at the top of the sealing strip, insert the sealing strip tab into the door sheet metal.
2. Position the sealing strip to the door pinch-weld flange and apply pressure in order to seat the sealing strip.
3. Ensure that the sealing strip is fully seated against the pinch-weld flange.