Envoy 2WD L6-4.2L (2008)
Trunk / Liftgate Latch: Service and Repair
Liftgate Window Latch Replacement
Removal Procedure
1. Remove the liftgate window garnish molding.
2. Remove the liftgate trim panel.
3. Remove the bolts that retain the latch to the liftgate.
4. Disconnect the electrical connector.
5. Remove the latch from the liftgate.
Installation Procedure
1. Position the latch to the liftgate.
2. Connect the electrical connector.
3. Install the bolts that retain the latch to the lift gate.
Notice: Refer to Fastener Notice.
4. Adjust the portion of the latch to allow the lift gate window striker enter the center of the latch.
Tighten the latch bolts to 10 N.m (89 lb in).
5. Install the liftgate trim panel.
6. Install the liftgate window garnish molding.