Envoy 2WD L6-4.2L (2008)
Correction # 3
Replace the Velcro on the plastic extensions following the procedure below.
1.
Remove the hook portion of the Velcro from the plastic extension(s) using a utility knife.
Important:
The hook portion of the Velcro is sonic welded to the plastic extension in the middle and on the outer edges.
2.
Apply a fast cure, two-part epoxy to the plastic extension and install 3M(TM) Dual Lock(R) to the extension using the coarser of the two.
Parts Information
Warranty Information (excluding Saab U.S. Models)
For vehicles repaired under warranty, use the table above.
Warranty Information (Saab U.S. Models)
For vehicles repaired under warranty, use the table above.
Disclaimer
