Envoy 2WD L6-4.2L (2008)
8. Remove the 2 bolts from the seat back recliner arm.
9. Remove the seat back assembly from the seat adjuster.
Installation Procedure
1. Install the seat back to the seat adjuster.
Notice: Refer to Fastener Notice.
2. Install the seat back to the seat back recliner arm with the 2 bolts.
Tighten the bolts for the seat back recliner arm to 55 N.m (41 lb ft).
3. Install the seat back pivot bolt.
Tighten the seat back pivot bolt to 35 N.m (26 lb ft).
4. Pull the seat back cover down over the seat back pad.
5. Attach the hook and loop retaining strips by running your hand over the seat cover.