Envoy 2WD L6-4.2L (2008)
4. Install the side impact module tub to the seat back frame with 2 push pins (1).
Notice: Refer to Fastener Notice.
5. Install the inflatable side impact module to the seat back frame with 2 screws (1).
Tighten the side impact module screws to 9 N.m (80 lb in).
6. Install the seat belt and retractor assembly.
7. Install the lumbar assembly.
8. Install the front seat back panel.
9. Install the seat back cover and pad.
10. Install the front seat back.
11. Install the seat trim panel.
12. Install the seat assembly to the vehicle.
Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement
Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement
Removal Procedure
1. Remove the front bucket seat assembly from the vehicle.
2. Remove the front seat back cover and pad.
3. Remove the lumbar cables from the panel clips.
4. Remove the 2 push-pin fasteners (1) from each side of the panel.
