Envoy 2WD L6-4.2L (2008)
Important: Ensure that the hook and loop retaining strips remain attached to the seat back pad.
12. Release the cover from the hook and loop retaining strips on the front of the seat back pad.
13. Remove the 6 push-pins from the seat back.
14. Remove the cover and pad from the seat back.
15. Release the 3 hog-rings from the reinforcement bar.
16. Remove the seat cover from the pad.
Installation Procedure
1. Install the seat back pad to the seat back frame.
2. Install the 6 push-pins that retain the seat back pad to the seat back frame.
3. Partially install the seat cover.