Envoy 2WD L6-4.2L (2008)
7. Remove the camshafts.
Installation Procedure
1. Coat the camshaft journals, camshaft journal thrust face, and camshaft lobes with clean engine oil.
2. Install the intake and exhaust camshafts to their original positions.
3. Install the J 44221 with the camshaft flats up and the number 1 cylinder at top dead center.
Notice: Refer to Fastener Notice .
Important: Install the camshaft caps onto their original locations. The camshaft caps are pin stamped for direction and numerical order.
