Envoy 2WD L6-4.2L (2008)
Notice: Refer to Fastener Notice .
4. Install the exhaust camshaft actuator bolt.
*
Tighten the exhaust camshaft actuator bolt the first pass to 25 N.m (18 lb ft).
*
Use the J 36660-A to tighten the exhaust camshaft actuator bolt the final pass an additional 135 degrees.
5. Remove the J-44217 .
6. Install the camshaft cover. Refer to Camshaft Cover Replacement (See: Cylinder Head Assembly/Valve Cover/Service and Repair) .