Envoy 2WD L6-4.2L (2008)
Clearance Lamp: Service and Repair
Clearance Lamp Replacement
Removal Procedure
1. Turn OFF the headlamp switch.
2. Remove the push-pin.
3. Insert a small flat bladed tool under the rear edge of the lens and pry upward.
4. Remove the lens by pulling rearward.
5. Twist the bulb counterclockwise to remove.
Installation Procedure
1. Insert the bulb into the bulb socket and twist clockwise to install.
2. Insert the forward edge of the lens into the opening and press the rear edge downward to install.
3. Install the push-pin.
