Envoy 2WD L6-4.2L (2008)
6. Lift up the front of the air cleaner outlet resonator (2).
7. Disconnect the crankcase clean air hose from the valve cover port.
8. Disconnect the crankcase clean air hose from the air cleaner outlet resonator (2).
Installation Procedure
1. Connect the crankcase clean air hose to the air cleaner outlet resonator (2).
2. Connect the crankcase clean air hose to the valve cover port.
Notice: Refer to Fastener Notice .
3. Install the 2 resonator to engine bolts (4) to the air cleaner outlet resonator (5).
Tighten the bolts to 6 N.m (53 lb in).
