Envoy 2WD L6-4.2L (2008)
1. Lubricate the new injector O-ring seals (2, 4) with clean engine oil.
2. Install the new injector O-ring seals on the fuel injector (3).
3. Install a new retainer clip (1) on the injector (3).
4. Push the fuel injectors (3) into the fuel rail (1) injector socket with the electrical connector facing outward. The retainer clip locks on to a flange on
the fuel rail injector socket.
5. Connect the fuel injector electrical harness (2) connectors to the fuel injectors (3).
6. Install the fuel rail assembly (1).
