Envoy 2WD L6-4.2L (2008)
3. Remove the EVAP/fuel hose/pipe assembly retaining bolt (3) from the transmission.
4. Disengage the EVAP/fuel hose/pipe assembly from the clip (1) at the rear of the transmission.
10. Use the following procedure with 4-wheel drive (4WD):
1. Remove the transfer case.
2. Remove the transmission support.
3. Lower the transmission slightly.
4. Remove the EVAP/fuel hose/pipe assembly retaining bolt (3) from the transmission.
5. Remove the EVAP/fuel hose/pipe assembly (2) from the clip at the rear of the transmission.
11. Remove the EVAP/fuel hose/pipe assembly (4) from the fuel pipe clip at the rear of the engine.
12. Disconnect the EVAP purge pipe at the fuel tank.