Envoy 2WD L6-4.2L (2008)
Fuel Tank Shield: Service and Repair
Fuel Tank Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the frame brace mounting bolts.
3. Remove the frame brace.
4. Remove the fuel tank shield to the frame retaining bolts and nut.
5. Remove the fuel tank shield from the frame.
Installation Procedure
1. Install the fuel tank shield to the frame.
Notice: Refer to Fastener Notice.
2. Install the fuel tank shield to the frame retaining bolts and nut.
Tighten the fuel tank shield to the frame retaining bolts and nut to 32 N.m (24 lb ft).
