Envoy 2WD L6-4.2L (2008)
Ignition Coil: Service and Repair
Ignition Coil Replacement
Removal Procedure
1. Remove the air cleaner outlet resonator.
2. Disconnect the ignition coil connectors (1) from the ignition coils.
3. Remove the retaining bolts (2) from the ignition coils.
4. Remove the ignition coils (1) from the engine.
Installation Procedure
Important: Make sure that the ignition coil seals are properly seated to the valve cover.
1. Install the ignition coil (1).
