Envoy 2WD L6-4.2L (2008)
Positive: Service and Repair
Battery Positive Cable Replacement (4.2L Engine)
Removal Procedure
1. Disconnect the battery negative cable.
2. Loosen the battery positive cable bolt.
3. Remove the positive battery cable (1) from the battery.
4. Loosen the positive battery cable terminal bolt (1) at the junction block.
5. Remove the positive battery cable terminal (2) from the junction block.
6. Disconnect the battery cable conduit from the conduit retaining clip.
7. Remove the battery positive cable from the conduit.
8. Remove the battery positive cable harness from the fir-tree retainer on the powertrain control module (PCM) bracket.
