Envoy 2WD L6-4.2L (2008)
Starter Motor: Service and Repair
Starter Motor Replacement (4.2L Engine)
Removal Procedure
1. Disconnect the battery negative cable.
2. Remove the vacuum brake booster hose.
3. Remove the battery positive lead from the solenoid (1).
4. Remove the starter solenoid S-terminal lead nut (1) from the solenoid.
5. Remove the starter solenoid S-terminal lead (2) from the solenoid.
6. Remove the starter mount bolt and nut (1, 2).
7. Remove the starter motor.
Installation Procedure