Envoy 2WD L6-4.2L (2008)
Notice: Clean the power steering gear inlet and outlet ports thoroughly of any debris. Failure to do so could result in contamination and damage to
the power steering system components.
25. Install the seal extraction end of the J 44586 (2) to the power steering gear oil seal (1).
26. Extract the power steering gear oil seal (1) from the power steering gear using the J 44586 (2) with the aid of a flat-bladed tool (3) for additional
leverage.
27. With the hose assembly on a work bench, note the location of the hoses.
28. Remove the 3 retaining clamps. Note the location for assembly.
29. Remove the damaged power steering hose.
Installation Procedure
1. Place the replacement hose into the hose assembly.
2. Install the 3 retaining clamps as noted during disassemble.
