Envoy 2WD L6-4.2L (2008)
13. Insert a 0.25 mm gage (1) between the rack (2) and the inner tie rod housing in order to check both stakes. The feeler gage (1) must not pass
between the rack and the housing stake.
14. Slide the shock dampener (2) over the inner tie rod housing (3) until the front lip of the shock dampener (2) bottoms against the inner tie rod
housing (3).
15. To assemble the rack and pinion boot. Refer to Steering Gear Boot Replacement - Off Vehicle (See: ) .
Steering Gear Rack Bearing Preload Adjustment - Off Vehicle
Steering Gear Rack Bearing Preload Adjustment - Off Vehicle
