Envoy 2WD L6-4.2L (2008)
Notice: Refer to Fastener Notice .
2. Install the shock module yoke to shock absorber bolt and nut.
Tighten the shock module yoke to shock absorber bolt to 70 N.m (52 lb ft).
3. Install the shock module yoke to lower control arm mounting nut.
Tighten the shock module yoke to lower control arm mounting nut to 111 N.m (82 lb ft).
4. Remove the jack stand from the lower control arm.
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
6. Lower the vehicle.