gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

CD Changer - Will Not Eject CD|Page 10202 > < Component Locations|Page 10192
Page 1
background image

CD Changer: Customer Interest
CD Changer - Will Not Eject CD

File In Section: 08 - Body and Accessories 

Bulletin No.: 99-08-44-002

Date: April, 1999

TECHNICAL

Subject:
Inoperative CD Changer (Trip Latch Mechanism)

Models:
1999 Cadillac Escalade
1999 Chevrolet and GMC C/K, S/T Models (Blazer, Jimmy, Yukon Denali)
1999 Oldsmobile Bravada
with Side Load CD Changer

1998-99 GMC Envoy
with End Load CD Changer

Condition

Some customers may comment that the CD Changer will not release when depressing the EJECT button.

Cause

This condition may be caused by the following:

^

Incorrect loading of the CD into the magazine and/or loading of the magazine Into the CD Changer.

^

Lack of battery voltage to the CD Changer (i.e. Changer unplugged).

Correction

Important

Identify which Changer you have before proceeding.

You will need a 152.4 mm (6 in) metal mechanics ruler (152.4 mm (6 in long x 1/2 in wide x .020 in thick) with square corners on one end. See Figure 1.

Correction for Side Load Models

CD Changer - Will Not Eject CD|Page 10202 > < Component Locations|Page 10192