Envoy 2WD V6-4.3L VIN W (1998)
Radio/Stereo: Service and Repair
Radio Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the battery negative cable.
2. Remove the instrument panel accessory trim plate.
3. Remove the radio mounting screws.
4. Remove the radio.
5. Disconnect the electrical connector and the antenna lead.
INSTALLATION PROCEDURE
1. Connect the electrical connector and the antenna lead.
2. Install the radio.
3. Install the radio mounting screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
4. Install the instrument panel accessory trim plate.
5. Connect the battery negative cable.
6. Verify proper radio operation.
