Envoy 2WD V6-4.3L VIN W (1998)
Speaker: Service and Repair
Front
REMOVAL PROCEDURE
1. Remove the front speaker grille screws.
2. Remove the radio front speaker grille.
3. Remove the radio front screws.
4. Remove the radio front speaker.
5. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the radio front speaker.
3. Install the radio front speaker screws.
Tighten
Tighten the radio front speaker screws to 1.9 N.m (17 lb in).
4. Install the radio front speaker grille.
5. Install the radio front speaker grille screws.
Tighten
Tighten the radio front speaker screws to 1.9 N.m (17 lb in).
6. Inspect for proper circuit operation.