Envoy 2WD V6-4.3L VIN W (1998)
Front Door Panel: Service and Repair
Door Trim Panel Replacement
Removal Procedure
Tools Required
J 38778 Trim Pad and Garnish Clip Remover
1. Remove the inside door handle bezel.
2. Remove the window regulator handle, if equipped.
3. Remove the power accessory switch mounting panel, if equipped with power accessories.
4. Remove the trim panel armrest screws.
5. Use the J 38778 in order to release the door trim panel retainers.
6. Remove the door trim panel from the door.
Installation Procedure
1. Install the door trim panel to the door.
2. Install the trim panel armrest screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the power accessory switch mounting plate, if equipped with power accessories.
4. Install the window regulator handle, if equipped.
5. Install the inside door handle bezel.