Envoy 2WD V6-4.3L VIN W (1998)
Installation Procedure
1. Install the power window motor, if equipped.
2. Install the window regulator to the door.
3. Install the rivets that secure the window regulator to the door.
4. Connect the electrical connector, if equipped.
5. Install the window.
Window Regulator Handle Replacement
Removal Procedure
Tools Required
J 9886-01 Door Handle Clip Remover
1. Close the window.
2. Insert the J 9886-01 between the handle and the bearing plate.
3. Align the J 9886-01 with the handle.
4. Push the J 9886-01 in order to disengage the clip.
5. Pull the handle from the door.
6. Remove the window regulator handle from the door.
7. Remove the bearing plate from the door.
Installation Procedure
