Envoy 2WD V6-4.3L VIN W (1998)
4. Remove the console compartment inserts.
5. Remove the nuts that retain the front of the console.
6. Remove the cup holder insert.
7. Remove the screws that retain the front of the console to the vehicle.
8. Remove the console from the vehicle.
INSTALLATION PROCEDURE
1. Install the console to the vehicle.
2. Install the screws that retain the front of the console.
Tighten
Tighten the screws to 7 N.m (63 lb in).
3. Install the cup holder insert.
4. Install the nuts that retain the rear of the console.
Tighten
Tighten the nuts to 10 N.m (89 lb in).