Envoy 2WD V6-4.3L VIN W (1998)
1. Install the console wiring harness to the console.
2. Install the rear seat audio control to the console
3. Install the amplifier to the console.
4. Install the compact disc player to the console.
IMPORTANT: Do not pinch the instrument panel to console wiring harness during this process.
5. Install the console to the vehicle by lifting the console (1) over and onto the floor studs.
6. Install the fasteners (2) that retain the console to the vehicle.
Tighten
Tighten the console to the vehicle retainers to 10 N.m (88 lb in).
7. Install the convenience tray to the armrest storage compartment.
8. Connect the instrument panel to console wiring harness connection.
9. Install the passenger side toe-panel by firmly pressing the panel into place.
10. Carefully press the wood shifter assembly close-out into place. Rotate the closeout panel in order to fit the panel over the shift handle.
11. Install the front ashtray to the console by firmly pressing the ashtray into place.
Full Length (Manual Trans)
