Envoy 2WD V6-4.3L VIN W (1998)
Trim Panel: Service and Repair
REMOVAL PROCEDURE
1. Set the park brake.
2. Block the wheels.
3. Remove the left-side instrument panel sound insulator.
4. Remove the center instrument panel sound insulator.
5. Release the park brake release cable from the park brake lever.
6. Remove the screw that retains the courtesy lamp to the knee bolster.
7. Remove the screws that retain the knee bolster to the instrument panel.
8. Remove the knee bolster from the vehicle.
INSTALLATION PROCEDURE
1. Install the knee bolster to the vehicle.
2. Install the screws that retain the knee bolster to the instrument panel.
Tighten
^
Tighten the Torx screws to 9 Nm (80 lb in).
^
Tighten the hex head screws to 1.9 Nm (17 lb in).
3. Install the park brake release cable to the park brake lever.
4. Install the center instrument panel sound insulator.
5. Install the left-side instrument panel sound insulator.
