Envoy 2WD V6-4.3L VIN W (1998)
IMPORTANT: Secure all of the components of the accelerator and the cruise control cables as specified. Ensure that the throttle linkage
operates freely without binding between the idle position and the wide open throttle.
10. Push the cable adjuster plunger into the locked position (2). Ensure that the white paint area is no longer visible.
^
The lash should automatically be set at 0.0-1.0 mm (0.0-0.04 in) by the adjuster.
^
If an adjustment is required, refer to Cruise Control Cable Adjustment (4.3L).
11. Connect the electrical connection to the cruise control servo module.
12. Test the systems operation.
