Envoy 2WD V6-4.3L VIN W (1998)
3. Install the crankshaft position reluctor ring and the engine front cover.
4. Install the valve lifter pushrod guide.
IMPORTANT: When the timing marks on the camshaft and the crankshaft sprocket are aligned, the engine is at top dead center for cylinder
number four. In order to install the distributor align the crankshaft balancer marks with the engine front cover marks for top dead center cylinder
number one.
5. Install the lower intake manifold.
6. Install the A/C condenser, if equipped
7. Install the radiator.
