Envoy 2WD V6-4.3L VIN W (1998)
Compressor Clutch Hub: Service and Repair
Tools Required
-
J 33013-B Hub and Drive Plate Remover/Installer
-
J 33027-A Clutch Hub Holding Tool
-
J41790 Compressor Holding Fixture
Removal Procedure
1. Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture, J41790 in a vise and attach the compressor to the J41790.
3. Hold the clutch hub and drive plate assembly (2) in place using the J 33027-A.
4. Remove the compressor shaft nut with a 13 mm socket (1).
