Envoy 2WD V6-4.3L VIN W (1998)
Brake Light Switch: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cable.
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
2. Disconnect the electrical connector from the stoplamp switch.
3. Remove the pushrod retainer from the brake pedal pin.
4. Remove the stoplamp switch. Unsnap the switch from the pushrod.
INSTALLATION PROCEDURE