Envoy 2WD V6-4.3L VIN W (1998)
Ash Tray Lamp: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the battery negative cable.
2. Remove the ash tray.
3. Remove the knee bolster trim panel.
4. Remove the screws that retain the ash tray housing to the instrument panel.
5. Slide the ash tray housing forward.
6. Remove the bulb from the ash tray housing.
6.1.
Squeeze the metal tangs on the bulb shield.
6.2.
Lift the bulb from the socket.
INSTALLATION PROCEDURE