Envoy 2WD V6-4.3L VIN W (1998)
Fog/Driving Lamp Switch: Service and Repair
REMOVAL PROCEDURE
1. Ensure that the headlamp switch is in the OFF position and that the ignition switch is in the LOCK position.
2. Remove the instrument panel accessory trim plate.
3. Disconnect the electrical connector.
4. Remove the fog lamp switch from the headlamp switch panel by gently prying it out with a flat-bladed tool.
INSTALLATION PROCEDURE
1. Install the fog lamp switch to the headlamp switch panel. Ensure that the switch retainers are fully seated to the headlamp switch panel.
2. Connect the electrical connector.
3. Install the instrument panel accessory trim plate.
