Envoy 2WD V6-4.3L VIN W (1998)
Input 2
Range: ON/ OFF
The BCM uses the headlamp Relay Feedback input in order to determine if the headlamps are ON or OFF by determining if current is present on the
headlamp circuit. The BCM monitors CKT 352 in order to determine if the headlamp power relay energizes.
ON displays when the BCM receives a voltage input on the circuit between the headlamp switch and the headlamp power relay coil. The voltage input
indicates that the headlamps are ON.
OFF displays when the BCM does not receive a voltage signal on the circuit between the headlamp switch and the headlamp power relay coil. The lack
of voltage indicates that the headlamps are OFF.
High Beam Switch
