Envoy 2WD V6-4.3L VIN W (1998)
Data
Range: 0-0 seconds
The BCM uses the courtesy lamp timer in order to control the devices that attach to the following circuits:
^
Illuminated entry - The courtesy lamps will turn ON when you enter the vehicle. The lamps will stay ON for 15 seconds or until the ignition switch
is turned to the ON position.
^
Remote illuminated entry - The courtesy lamps will turn ON when the RFA transmitter UNLOCK or REAR button is pressed. The lamps will stay
ON for 40 seconds or until the ignition switch is turned to the ON position.
^
Exit lighting - The courtesy lamps will turn ON when the key is removed from the ignition switch. The lamps will stay ON for 40 seconds. The
number of seconds displayed refers to the amount of time left before the BCM turns the courtesy lamp relay OFF.
Ignition 1
