Envoy 2WD V6-4.3L VIN W (1998)
Range: ACTIVE/INACTIVE
The BCM uses the Ignition 1 data in order to determine the position of the ignition switch.
ACTIVE displays when the ignition switch is in the RUN or CRANK position.
INACTIVE displays when the ignition switch is not in the RUN or CRANK position.
Ignition 3
Security Data
Range: ACTIVE/INACTIVE
The BCM uses the Ignition 3 data in order to determine the position of the ignition switch.
ACTIVE displays when the ignition switch is in the RUN position.
INACTIVE displays when the ignition switch is not in the RUN position.
Battery Voltage
Security Data
Range: 0.0 - 16.0 volts
The voltage value that displays refers to the battery system voltage measured by the BCM on CKT 1140.
Content Theft State
