Envoy 2WD V6-4.3L VIN W (1998)
8. SIR lead wire from the clip on the inflator module.
9. SIR lead wire from the clip on the steering wheel.
10. Connector position assurance (CPA) retainer and electrical connector.
11. Remove the inflator module from the vehicle.
CAUTION: When you are carrying an undeployed inflator module:
-
Do not carry the inflator module by the wires or connector on the Inflator module.
-
Make sure the bag opening points away from you.
-
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical.
Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.
INSTALL OR CONNECT
1. Electrical connector and CPA retainer.
2. SIR lead wire to the clip on the steering wheel.
3. SIR lead wire to the clip on the inflator module.
4. Inflator module by pressing it firmly onto the steering wheel to engage and latch the leaf springs on the four notched pins.
-
Make sure that the SIR wires do not get pinched during installation of the inflator module.
5. Enable the SIR system, refer to "Enabling the SIR System."
6. Negative battery cable.
