Envoy 2WD V6-4.3L VIN W (1998)
Air Bag Deactivation Switch: Service and Repair
Removal Procedure
Caution: Refer to SIR Handling Caution in Cautions and Notices.
1. Disable the SIR system. Refer to Disabling the SIR System. See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair/Air Bag
Disarming and Arming/Disabling the SIR System
2. Use a flat-bladed tool in order to pry the switch from the instrument panel.
3. Remove the switch from the instrument panel.
4. Disconnect the electrical connections, as needed.
Installation Procedure
1. Connect the electrical connections, as needed.
2. Install the switch to the instrument panel by firmly pressing the switch into place.
3. Enable the SIR system. Refer to Enabling the SIR System. See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair/Air Bag
Disarming and Arming/Enabling the SIR System
