Envoy 2WD V6-4.3L VIN W (1998)
Headlamp Switch: Service and Repair
REMOVAL PROCEDURE
1. Ensure that the headlamp switch is OFF and that the ignition switch is in the LOCK position.
2. Remove the instrument panel accessory trim plate.
3. Disconnect the electrical connector.
4. Remove the screws that retain the headlamp switch panel to the instrument panel accessory trim plate.
5. Remove the headlamp switch panel from the instrument panel accessory trim plate.
INSTALLATION PROCEDURE
1. Install the headlamp switch panel to the instrument panel accessory trim plate.