Envoy 2WD V6-4.3L VIN W (1998)
1. Install the inflatable restraint front end discriminating sensor to the lower radiator support surface make sure the arrow is pointing toward the front
of the vehicle.
2. Install the inflatable restraint front end discriminating sensor mounting rivets (P/N 15715058).
3. Connect the inflatable restraint front end discriminating sensor harness connector to the sensor.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint front end discriminating sensor harness connector.
5. Install the off road skid plate in equipped.
6. Enable the SIR system. Refer to Enabling the SIR System. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and Arming/Enabling the SIR System
