gmc Workshop Repair Guides

GMC Envoy 2WD V6-43L Workshop Service and Repair Manuals

ABOUT US
Underhood Fuse Block Internal Location View|Page 8632 > < Underhood Fuse Block Internal Location View|Page 8630

Envoy 2WD V6-43L | Starting and Charging | Power and Ground Distribution | Fuse Block

Page 2
background image

6. Loosen the bolts that secure the electrical connectors to the bottom of the underhood electrical center.

7. Disconnect the electrical connectors.
8. Remove the underhood electrical center from the vehicle.

INSTALLATION PROCEDURE

NOTICE:  Refer to Fastener Notice in Cautions and Notices.

1. Connect the electrical connectors.

Tighten
Tighten the electrical connector bolts to 7 N.m (62 lb in).

Underhood Fuse Block Internal Location View|Page 8632 > < Underhood Fuse Block Internal Location View|Page 8630