Envoy 2WD V6-4.3L VIN W (1998)
Steering Wheel: Service and Repair
Inflator Module
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Disable the SIR system, refer to "Disabling the SIR System."
3. Turn the ignition switch to the OFF position to unlock the steering wheel and turn the steering wheel 90 degrees from the straight-ahead position in
order to gain access to the access holes behind the steering wheel.
4. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.
5. Turn the steering wheel 180 degrees to gain access to the remaining access holes.
6. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.
7. Tilt the top of the inflator module rearward to gain access to the SIR wiring.
