Envoy 2WD V6-4.3L VIN W (1998)
Control Arm Bushing: Service and Repair
Upper Control Arm Bushings Replacement
REMOVAL PROCEDURE
^
Tools Required:
-
J 2147401 Control Arm Bushing Service Set
-
J 222691 Tie Rod End Installer
1. Remove the upper control arm from the vehicle.
2. Mount the upper control arm in a vise.
3. Remove the washers and the nuts.
4. Remove the upper control arm bushings. Use the J 222691 and the J 2147401.
5. Remove the upper control arm shaft from the control arm.
INSTALLATION PROCEDURE
^
Tools Required:
-
J 222691 He Rod End Installer