Envoy 2WD V6-4.3L VIN W (1998)
3. Rinse with water and blow dry.
4. Mask the tire off.
5. Finish with Ditzler Delclear(TM) acrylic urethane and Ditzler Ultra(TM) urethane additive, or equivalent. Use the following three coats:
5.1. 1st coat - Light mist coat, let flash
5.2. 2nd coat - Light, let flash
5.3. 3rd coat - Heavy, double wet coat
6. Let dry for 24 hours or, if necessary, flash for 30 minutes. Force dry at 60° C (140° F) for 30 minutes. Allow to cool for 30 minutes before
mounting.
7. Balance the tire and wheel assembly. Replace the original balance weights with coated weights.
8. Mount the weights in the marked positions. Remove the masking from the tire.
