Envoy 2WD V6-4.3L VIN W (1998)
Pressure Plate: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 33169 Clutch Alignment Tool
1. Raise the vehicle.
CAUTION: Refer to Fastener Notice in Service Precautions.
2. Remove the transmission.
3. Mark the flywheel, cover plate, and pressure plate for installation alignment.
4. Install J 33169 through the cover plate, pressure plate, and into the flywheel for support during plate removal.
5. Remove the bolts and washers securing the clutch pressure plate and cover plate to the flywheel.
6. Remove J 33169 and the plates from the flywheel.
INSTALLATION PROCEDURE
^
Tools Required
-
J 33169 Clutch Alignment Tool