Envoy 2WD V6-4.3L VIN W (1998)
3. Install the cover bolts.
^
Tighten the bolts to 35 Nm (26 ft. lbs.) in a crosswise pattern.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Replenish the axle housing with new lubricant to level within 9.5 mm (3/8 inch) of the fill plug hole.
5. Reinstall the fill plug.
^
Tighten the fill plug to 35 Nm (26 ft. lbs.).
6. Lower the vehicle.
