Envoy 2WD V6-4.3L VIN W (1998)
Fluid Pressure Sensor/Switch: Service and Repair
VALVE BODY AND PRESSURE SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the transmission oil pan and filter.
3. Disconnect the electrical connectors from the control valve body components.
4. Remove the torque converter clutch (TCC) solenoid bolts.
5. Remove the wiring harness bolts.
6. Remove the TCC solenoid assembly with the O-ring seal and the wiring harness, then reposition.
