Envoy 2WD V6-4.3L VIN W (1998)
Window Regulator: Service and Repair
Power Window Motor
Caution: Sector gear must be locked into position. Regulator lift arm is under tension from the counterbalance spring and could cause personal
injury it the sector gear is not locked in position.
Removal Procedure
1. Remove the window regulator.
2. Drill a hole through the window regulator and the sector gear.
3. Install a bolt and a nut through the hole in order to lock the sector gear in position.
4. Drill out the rivets that secure the power window motor to the window regulator.
5. Remove the power window motor from the window regulator.
Installation Procedure
1. Install the power window motor to the window regulator.
Important: Remove the nut and the bolt that were used in order to secure the sector gear in position.
2. Install the rivets in order to secure the power window motor to the window regulator.
3. Install the window regulator.
